NEW & USED PORTABLE CABINS • MODULAR BUILDINGS • CONTAINERS

Expandacom - Flat Pack Site Offices

The prefabricated Expandacom is an insulated closed volume demountable accommodation unit, designed for use in very restricted areas above and below ground. Assembly is simple, and is achieved by mounting the sandwich panels and components into the steel frame and chassis, requiring only manpower. The unit comes with 1 x door panel and 2 x window panels as standard. These panels can be placed anywhere within the frame in order to design different configurations. Additional windows/doors can be supplied if required.

(L) 6020mm x (W) 2305mm x (H) 2590mm (20ft x 7ft 6in x 8ft 6in approx)

Walls & Ceiling - 50mm sandwich panels consisting of two 0.40mm powder coated galvanized steel sheets with 50mm high density (16 kg/m3) polystyrene insulation. Colour: Off-white (RAL 9002)

Roof - Ceiling supporting frame consists of a rigid and torsion resistant cold formed 1.5mm supporting frame, (retention bars) powder coated in off-white (RAL 9002) which locate into spiggots in the four corners of the 3mm corner posts. The outer roof skin is in two parts, and consists of 0.73mm box profile galvanized steel complete with integral gutters.The roof structure has an evenly distrubuted load capacity of100 kg/m².

Doors & Windows - Frame – Cold formed powder coated 1.25mm galvanized steel.
Door - 0.73mm powder coated galvanized flat steel formed into a sandwich panel with 50mm honeycomb insulation c/w with all door furniture and euro cylinder lock.
Windows - uPVC d/glazed window (805 x 1135mm) with vacuum sealed unit (4+10.5+4), inward opening with locking handle.

Chassis/Floor - 12mm Cement Particle Board fixed to a steel structure reinforced to satisfy bearing capacity and rigidity requirements, on which 2mm thick PVC linoleum covering is laid over. (Flash point B1 – difficult to burn, smoke density Q1). Chassis supporting frames and structure are manufactured from 3mm cold formed galvanized steel profiles. Vertical profiles are 1.5 & 2mm cold formed powder coated black steel profiles. Chassis can be split into five parts if required. Structure has 250 kg/m² evenly distrubuted load capacity. Deflection is L/300 when placed directly onto level ground.

Electrical Equipment - The unit is designed to have a surface mounted electrical installation. Optional electric pack available.

Expandable & Stackable - Expandacom can be extended side to side or end to end by using the special linking kit. Units can be stacked by using the stacking kit. Both items are available seperately.

Packing - All components of the Expandacom are packed to ensure that they are not damaged during transportation, loading and unloading under normal circumstances. The smallest transportation cube is achieved in this packing process.

Expandacom is not designed to comply with Building Regulations approval.

Accessories   |   Expandacom Example Drawing   |   Download Expandacom Brochure (PDF)